• Catalogue
• Ancillaries

Ancillaries

Chimwrap

Chimwrap is the ideal solution to insulating multi fuel flexible stainless steel chimney liner's. This unique and patented product manufactured in the UK, uses the most up to date technically designed products with ease of installation in mind. With a thickness of just 12mm, Chimwrap allows installation within the tightest of stacks.

K-Wrap

K-wrap is specifically designed for the thermal insulation of gas and oil stainless steel flexible chimney liners. Manufactured from long-strand textile grade non-combustible borosilicate glass fibre with a thickness of just 6mm, it allows installation within the tightest of stacks.

Pipe Section Insulation

Pipe section insulation is a tried and tested alternative to back-filling with loose granular insulation. By using the rigid pipe sectional insulation, you can be sure that you have fully insulated the entire flue run.

The sections come foil backed and are 30mm/50mm thick. They are manufactured from non-combustible rockwool and can withstand continuous operating temperatures of up to 500°C. The sections are also rot proof, odourless, they do not sustain vermin and will not encourage the growth of fungi, or mould.

Exodraft Chimney Fans

Exodraft chimney fans are designed to provide an accurate and fully controllable updraught for your chimney. They eliminate problems caused by downdraught, badly proportioned chimneys and negative pressure in the room due to extractor fans. The fans operate, preventing spillage into the room and enable installations of larger fireplaces which are connected to a chimney with a small flue diameter.

Chimney Cleaning Logs

Independent test results demonstrate that using chimney cleaning logs (CCL) can reduce creosote deposits in woodburning stoves and flues. The CCL in a fireplace can render the creosote more brittle and lower volatile organic compounds in the chimney. Subsequent mechanical sweepings are easier, cleaner and more effective. Whether using an open fire or wood / multifuel stove, a brick, lined or stainless steel twin wall chimney, a CCL will help to prevent a chimney fire. It even insures you and your home against it.

Firelighters

Burner Firelighters have great benefits over traditional solid firelighters. They have low flame height that releases the heat close to the charcoal/fuel and not into the air. The large surface area of the sachet gives a very hot combustion and the firelighter does not become clogged with ashes. They are odourless, having a high flash point (>65°C) and are free from aromatic solvents. You can also light the firelighter if it has been wet. They burn for 8-10 minutes.

Chimney Balloons

The Chimney Balloon is a very simple and effective way of blocking chimneys when not in use. It stops draughts and wasted heat going straight up the chimney.

A room with a blocked chimney needs only about half the heat compared to a room with an open chimney, so it makes sense to fit one in every chimney that is not in everyday use.

The Chimney Balloon is made in a special laminate of three plastics to make it air tight, tear resistant and long lasting. It also has a special shape that allows ventilation in two corners, to keep your chimney dry. Using a Chimney Balloon is completely safe and if accidentally heated it shrivels and deflates.

Draught Stabilisers

Draught stabilisers are designed to create exactly the right conditions for combustion. High up-draughts, experienced in windy or tall chimney locations, can adversely affect performance. Where this is likely to occur, we recommend a draught stabiliser to maintain the draught at the appropriate level. They can be used with gas, oil and solid fuel appliances.

Aircore Ventilators

Rytons Aircore Ventilators are a cowled appliance and room ventilator. The outer cowl and internal baffles reduce light and draughts and are U.V. stabilised. These can be used on new and refurbishment projects and are the only ventilators recommended by HETAS to their registered engineers. 

Watch the video - http://youtu.be/EsK3ODptevU

Kevington Faststack

The Kevington Faststack system is a revolutionary prefabricated chimney system, which simplifies the traditional concept of chimney construction, and offers unrivalled flexibility for modern day properties. The chimneys are delivered to site as complete units clad in real brick, stone or render.

Isokern

Isokern products can be used for new chimneys and for the refurbishment of existing chimneys. The Isokern chimney systems provide a lightweight, easily installed and versatile chimney which can be used internally or externally. The systems are suitable for use with gas, oil, solid fuel and wood burning appliances in new and refurbished projects. They are ideal for Timber Frame and Steel Frame construction.

Red Bank

The latest range of chimney products from Red Bank have been developed to harmonise with nature's changing environments. The range offers texture, colour and performance allowing architects and builders to create masterpieces that withstand the test of time.

Downloads

• Chimwrap product leaflet
• Chimwrap price list
• K-Wrap product leaflet
• K-Wrap price list
• Pipe section insulation product leaflet
• Pipe section insulation price list
• Exodraft chimney fans product leaflet
• Exodraft price list
• Chimney cleaning logs leaflet
• Chimney cleaning logs price list
• Firelighters leaflet
• Firelighters price list
• Chimney balloons product leaflet
• Draught stabilizer price list
• Kevington faststack product leaflet
• Redbank product leaflet
• Register plates leaflet
• Register plate split collar leaflet
• CO alarms leaflet
• Moisture meters leaflet
• Thermometer leaflet
• Stove & slue safety/maintenance kit leaflet
• Flue enclosure band leaflet
• Aircore Ventilators Technical Data Sheet - 125mm Aircore
• Aircore Ventilators Technical Data Sheet - Cowled 125mm Baffled Aircore
• Exhausto Appraisal Form - Boilers
• Exhausto Appraisal Form - Fireplaces

Images